MIDWEST Model CF 1535 MACHINE CENTER

THE CF1535 IS A HIGHLY SPECIALIZED MACHINE FOR PRODUCING KITCHEN COUTERTOPS, BARTOPS, VANITIES AND OFFICE WORK SURFACES FROM FROM PARTICLE BOARD, PLYWOOD OR MDF COMPOSITE PANELS. THE CF 1535 CUTS STICKS FROM THE EDGES OF THE PANEL AND GLUES THEM TO THE TOP AND / OR BOTTOM IN A CONTINUOUS PROCESS. THIS MACHINE UTILIZES VERTICLE SPINDLE SHAPERS FOR EDGE TRIMMING WITH MINIMAL SET-UP REQUIRED BETWEEN PROFILE CHANGES.

FEATURES;  WELDED STEEL FRAME CONSTRUCTION  *  TRANSPORT CHAINS ASSEMBLY WITH 3 3/16" WIDE CARRIER BLOCKS  *  RUBBER DRIVE PADS VULCANIZED TO STEEL PLATES AND MECHANICALLY FASTENED TO CARRIER BLOCKS  *  25 FEET PER MINUTE SPEED DRIVE  *  UPPER HOLD DOWN BEAM WITH DOUBLE ROW OF 2.75" DIAMETER WHEELS  *  HOT MELT ADHESIVE SYSTEM WITH HEATED HOSES, GUN AND MANIFOLD  *  AUTOMATIC BUILDDOWN AND SCRIBE STICK  *  SIZING SAW ASSEMBLIES WITH AUTOMATIC GLUING/CLAMPING SYSTEM FOR FOR BUILDDOWN AND SCRIBE STICKS  *  CAST IRON COLUMNS WITH MACHINED DOVETAIL SLIDES FOR SIZINGS, MILLING AND SHAPING UNITS  *  SIZING, MILLING AND SHAPING UNITS HAVE HORIZONTAL AND VERTICLE ADJUSTMENT ON DOVETAIL SLIDES WITH DIAL INDICATORS  *  SIZING, MILLING AND SHAPING UNITS HAVE TILTABLE FROM 0 - 180 DEGREES WITH DUSTCOLLECTION HOOKUPS  *  ELECTRICAL ENCLOSURE WITH PUSH BUTTON CONTROLS

SPECIFICATIONS:

MINIMUM PANEL THICKNESS....1/2"

MAXIMUM PANEL THICKNESS....1 1/8"

MINIMUM PANEL WIDTH....12"

MAXIMUM PANEL WIDTH....50"

MINIMUM PANEL LENGTH....96"

BUILDDOWN / SCRIBE STICK  WIDTH MINIMUM....5/8"

BUILDDOWN / SCRIBE STICK WIDTH MAXIMUM...1 1/2"

BUILDDOWN / SCRIBE STICK THICKNESS MINIMUM.... 1/2"

NO-DRIP STICK WIDTH MINIMUM.....1/2"

NO-DRIP STICK WIDTH MAXIMUM....1 1/8"

TRANSPORT CHAIN PITCH....1 1/2"

TRANSPORT CHAIN WIDTH...1 3/8"

TRANSPORT CHAIN PAD WIDTH.... 3 3/16"

DRIVE MOTOR... 1 1/2 HP

FEED SPEEDS....15-35 FPM

POWER WIDTH MOTOR.... 1/2HP

SHAPING & MILLING MOTORS....5, 7 & 9HP

SHAPE & MILL SHAFT DIAMETER....1.57" (TILTABLE 0-180 DEGREES)

AIR REQUIREMENT...80 PSI

LOAD FEE....CALL RIGGER

ELECTRICAL DISCONNECT FEE...$  50.00