Ask Seller
SCM "K 800 FT" Edgebander with Nordson Glue System, Year 2014 machine 
Ended
Assets no longer required for continuing operations - Gallatin Gateway, MT
- Winning Bid : $34,250.00 USD Sold
- 58 Bid(s)
- High Bidder: k****x
Assets no longer required for continuing operations - Gallatin Gateway, MT ( Closed #10225085 )
Late model SCM K 800 FT edgebander, W/ Nordson PUR System
-
Item Location
12 Penny Ln. Gallatin Gateway, MT 59730
-
Make
SCM Group and Nordson
-
Model
K 800FT
-
Serial Number
AH/117813
-
Year
2014
-
Phase
3 PHASE
-
Voltage
230 VOLT
-
Inspection Date
By appointment only, contact Jack Ragan
-
Final Removal Date
4/30/18
-
Estimated Dimensions
166" Length x 36" Width x 62" Height - plus PUR glue system @ 27" x 15"x 38" @ 250 pounds
-
Estimated Weight
4,000 Pounds
-
Seller Comment
Seller has a forklift available for loading
-
page views
3536
SCM K 800 Edgebander
Dust collection duct work NOT included
Coil or strip feed
0.4 mm - 8 mm banding thickness
3 mm maximum guillotine capacity
8 mm - 60 mm panel thickness
140 mm miniumum panel length
55 mm minimum panel width
24" minimum distance between panels
36/52 FPM feed track speed via 2.5 HP feed motor
Touch screen PLC interface
12" screen
Capable of storing 100 programs
Color graphic display of working units
Tracks production information, diagnostics and maintenance
Operates in mm or inch mode
Swivels 270 degrees for easy access
Lighted sound enclosure
Electronic positioning of top pressure beam
Adjustable outboard support with roller track
Infeed fence
Mechanical digital indicator to position the fence and determine stock removal (by premill)
Pneumatic panel spacing device
Premill with two (2) cutterheads, counter rotating, 3.0 HP at 12,000 RPM
Jumping action adjusted from control panel
Vertical adjustment
Copy device to insure that material removal is consistent on long or slightly out of square panels
Standard glue pot system (included but not currently installed)
Teflon-lined glue pot
Quick disconnect for easy removal
Nordson PUR Blue glue system
Four (4) Jowat glue slugs (product #606.85)
Three (3) Jowat flush slugs (product #930.94)
Four (4) pressure rollers
First roller is powered and applies pressure pneumatically
Next three rollers are idle with opposing 1 degree tilt to apply extra pressure to top and bottom edge
Servo driven motor for positioning
Pneumatic jumping so the unit activates exactly on the leading/trailing edges
End trim with two (2) motors, 0.5 HP
Automatic tilting from control panel
Top/bottom flush trim with two (2) motors, 0.8 HP at 12,000 RPM
Two (2) position pneumatics
Vertical copy shoes
Quick release plugs to facilitate tooling changes
Top/bottom trim with two (2) motors, 1.0 HP at 12,000 RPM
Large diameter vertical and horizontal copy devices
Servo driven motor to adjust from one material thickness to another through control panel
Top/bottom profile scrapers
Pneumatic in/out positioning through control panel
Large diameter horizontal copy wheel and side copy wheel device
Quick knife replacement system
Top/bottom glue scrapers
Vertical rotating copy device and blowers
On/off pneumatic exclusion
Top/bottom osciallating buffers, 0.25 HP
Hot air blower
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginPick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment. For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532. Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased. Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed.
All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.