Bidding has ended on this item.
#LOTT1KGJM

SCM GROUP "STARTECH 27" MULTI SPINDLE DRILL, YEAR 2017 Ended

STARTECH 27 DRILL AND SCMI SANDYA 10 AUCTION - Costa Mesa CA

  • Winning Bid : $6,101.00 USD Sold
  • 57 Bid(s)
  • High Bidder: S****S
Documents
No documents available
Bidding Info
This auction uses Proxy Bidding.
Bids placed within the final 5 minutes will extend the auction closing time by 5 minutes.
img

2017 SCM GROUP STARTECH 27 AND SCM SANDYA 10S SANDER - Costa Mesa CA ( Closed #28221545 )

2017 SCM GROUP MODEL #STARTECH 27 MULTI SPINDLE BORING MACHINE AND 2003 SCMI SANDYA 10S 2 HEAD 52" WIDE BELT SANDER UP FOR AUCTION TO THE HIGHEST BIDDER. FOR QUESTIONS PLEASE CONTACT KIRK AT 925-250-8248 OR VIA EMAIL AT [email protected]

  • Item Location

    1139 Baker St, Costa Mesa, CA 92626, USA

  • Make

    SCM GROUP

  • Model

    STARTECH 27

  • Serial Number

    KK138030

  • Year

    2017

  • Phase

    3 PHASE

  • Voltage

    230 VOLT

  • Inspection Date

    BY APPT., PLEASE CONTACT KIRK @ 925-250-8248

  • Final Removal Date

    AUGUST 9TH, 2021

  • Estimated Dimensions

  • Estimated Weight

  • Seller Comment

  • Load Fee

    $200 LOADING FEE

  • page views

    4242

Multi-spindle Boring Machine
The Startech 27 is a heavy duty, Single head multiboring machine that is capable of performing horizontal, vertical and 45°
boring operations for wood and similar materials.

Base and working table
The base and worktable are made of both bended and welded steel plates to
create a large workpiece support surface for large jobs. Right/left extensions with
retractable stops L=3000mm are now standard! The extensions can be installed
on the guides already mounted on the machine and are positioned at 90° with
reference to the boring line; They are complete with no. 4 retractable stops
(which may also be used as rear guides) and two upper pressure cylinders for
the workpieces hold-down. The compass device allows the quick positioning of
the guide located opposite the one in use without the necessity of metric reads.

Gantry structure
The gantry uses an ultra-thick steel structure, with depth adjustment, to easily support the load bearing stress. Pneumatic
cylinders for the workpieces lock when machining pieces.

Standard Operating unit

Boring head with quick attachment spindles (32mm center-to-center distance) with an aluminium structure and gears.
The boring head movement is created through a pneumatic piston (standard).
Horizontal/vertical autom. positioning of boring unit
Adjustment, activated by pneumatic circuit, which allows the automatic boring head rotation from the control board
All spindles are preset for quick change adaptors
18 drilling bit-holder quick connect bushes 10 mm dia (9-standard and 9 additional ordered as an accesory)
Suction for shavings have an independent outlet on the boring head and air conveyor on the base
Workpiece and operating unit movement
Automatic head movement for the horizontal and vertical boring unit positioning,
with locking at 45°rear stops, lateral stops and extensions for long workpieces are
engineered to ensure the best working precision on the piece.

Major Features

  • Line and Construction boring with 45° positive stop
  • Two Pneumatic clamps
  • Preset with a total of 18 quick change 10mm adaptors
  • Right Left Extension fence with retractable stops (3000mm)
  • Fence for horizontal boring at 45°
  • One Supplementary top pressure cylinder
  • Device for working narrow workpieces
  • Calibration Jig

Specifications

HEAD GROUP

  • Number of spindles 27
  • Center-to-center distance between spindles 32mm
  • Spindles speed 3000 rpms
  • Motor power of spindles 1.5 (2) kW (Hp)
  • Number of revolving turret positions 6
  • Max stroke of boring unit 63mm
  • Stroke of hydraulic brake 50mm

TOOL

  • Maximum tool length 80mm
  • Max tool diameter 40mm

PANEL

  • Max. horizontal boring height mm 50
  • Max. width under the “gantry structure” mm 1.025
  • Max. distance of vertical borings from panel edge mm 110/320
  • Min. panel thickness mm 10
  • Max. panel thickness mm 60

INSTALLATION

  • Compressed air pressure bar 6
  • Compressed air consumption Nl/cycle 3,6
  • Exhaust outlets diameter mm 120+60+60
  • Exhaust air speed m/sec 30
  • Exhaust air consumption m3/hr 1220+300+300
  • Working table dimension mm 1.096 x 407
  • Worktable height from floor mm/inches 900/35.5”
  • Weight 370/815 Kg/Lbs

Listed specifications were taken from the manufacturer’s published information and is assumed to be correct but not guaranteed.

Bidder is encouraged to inspect the machine, call with questions contact the manufacturer for more information.

Please log in to view the bid history

A $200.00 LOADING FEE WILL BE CHARGED FOR LOADING ONTO FLAT BED TRUCK OR TRAILER ONLY.

CONTACT ALWAYS TRUCKING 541-608-6532
$0.00 USD
LOADING FEE
$200.00 USD

All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa, MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.