Length min. cap. is 6" & max. 100-1/2", min height cap. is 6" & max. 55", depth cap. is 26".

Multi-purpose Case Clamp with interlocking vertical & horizontal pressure beams is specially designed to save time and labor.  Clamping pressure is applied across the entire vertical and horizontal beams for clamping of case goods, drawers, etc.  Operation by selector switches for the following functions: Clamping pressure, Beams up/down, left/right, diagonal, and clamping time.  The lamellar Case Clamp solves one of the big problems with Case Clamp assembly; it eliminates setup time. If you have ever struggled or are struggling with an old Clamp, you know how time consuming cabinet assembly can be.
 

Before clamping each different cabinet size, several adjustments have to be made; this means loosening and tightening each individual clamping pressure point.  A sturdy, stress-free, welded steel frame guarantees square cabinet assembly; clamping beams move to position on precision trapezoidal threaded spindles and travel at 25 mm (1") per second.  The motor load for clamping pressure is digitally regulated to minimize the wear associated with clamps having standard clutch braking.  There is dual & single beam operation by (6) individual buttons; (0 - 30) Min Timer automatically opens the Clamp at the end of the cycle.

The switch at the top left of the control panel allows the operator to change clamping pressures (1,000 kG, 1,500 kG & 1,800 kG = 4,000 Lbs).