× Bidding has ended on this item.

Cabinet Crafterz - Atlanta, GA (Closed #35660384)

Cabinet Crafterz in Atlanta, GA is offering their excess machinery to make room for the arrival of new machinery!

Terms & Conditions
Value Added Service Information
15.00%  Buyer's Premium
This Auction Uses Proxy Bidding.
Ended

Weeke "BHC Venture 2" CNC Router - Pod & Rail

Late Model Machinery - Atlanta, GA

  Lot # 007
Listing Image
2022-05-25 10:30:00 PT 2022-05-25 10:30:00 PT America/Denver Weeke "BHC Venture 2" CNC Router - Pod & Rail Working Capacity:X Axis is 128 (3,250 mm) for boring 137.4 (3,490 mm) for routing. Y axis is 49.2 (1,250 mm) for boring 55 (1,400 mm) for routing, Z axis stroke is 7.2 (185 mm) for boring 11.8 (300 mm) for routing; max. material thickness 3.94 (100 mm). X Axis 197 FPM (60 MPM, Y Axis 164 FPM (50 MPM), Z axis travel speed 50 FPM (15 MPM). The machine head travels on THK linear motion guides on all axes. (6) Movable K-Table support rails w/(4) side mounted raise-and-lower panel feeding rails for large heavy panels. (6) Pneumatic backstops, (4) pneumatic front stops (2) pneumatic side stops create (2) working zones. 3 HP (2.2 kW) Boring Motor, variable speed from 1,500 - 7,500 RPM, (12) vertical QUICK CHANGE drill spindles, (6) spindles in X axis (6) in Y axis, (6) Horizontal spindles with (2+2) in X axis (1+1) in Y axis. (1) NC controlled 0 - 90 X / Y grooving saw for max 125 mm dia. saw blade. NC control is not verified yet. (1) 9-1/2 HP (7.5 kW) Electro-spindle router with HSK F63 adaptor, w/programmable 1,250 - 18,000 RPM, constant torque from 9,000 - 18,000 RPM, RH or LH rotation;Router is powered by a 11 kWinverter. (1) 8-Position ATC tool changer magazine mounted at the back of the machine. WEEKE IPC PC 85T Power Control + Windows XP + WoodWOP 5.0 operating system; Beckoff PLC for (3) axes with linear, circular helical interpolation, 15 TFT Monitor with 2D / 3D REAL TIME graphics, industrial keyboard for data entry, CD R/W 1.44 MB floppy drives, modem, USB slot, (1) 100 m/Hr Becker Vacuum Pump (2012), 2-zone safety mats (will stop machine if operator enters work area), safety fences, scrap conveyor, hand held pendant controller. Seller Statement: All (most) airlines have been recently replaced. Pictures 20-25 are of the machine before it was prepared for shipping. The information provided in this lot was gathered from literature, internet physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify. Unknown
Description

Working Capacity: "X" Axis is 128" (3,250 mm) for boring & 137.4" (3,490 mm) for routing.

"Y" axis is 49.2" (1,250 mm) for boring & 55" (1,400 mm) for routing, "Z" axis stroke is 7.2" (185 mm) for boring & 11.8" (300 mm) for routing; max. material thickness 3.94" (100 mm).

"X" Axis 197 FPM (60 MPM, "Y" Axis 164 FPM (50 MPM), "Z" axis travel speed 50 FPM (15 MPM).

The machine head travels on THK linear motion guides on all axes.

(6) Movable K-Table support rails w/(4) side mounted raise-and-lower panel feeding rails for large & heavy panels.

(6) Pneumatic backstops, (4) pneumatic front stops & (2) pneumatic side stops create (2) working zones.

3 HP (2.2 kW) Boring Motor, variable speed from 1,500 - 7,500 RPM, (12) vertical "QUICK CHANGE" drill spindles, (6) spindles in "X" axis & (6) in "Y" axis, (6) Horizontal spindles with (2+2) in "X" axis & (1+1) in "Y" axis.

(1) NC controlled 0° - 90° "X" / "Y" grooving saw for max 125 mm dia. saw blade.  NC control is not verified yet.

(1) 9-1/2 HP (7.5 kW) Electro-spindle router with HSK F63 adaptor, w/programmable 1,250 - 18,000 RPM, constant torque from 9,000 - 18,000 RPM, RH or LH rotation; Router is powered by a 11 kW inverter.

(1) 8-Position ATC tool changer magazine mounted at the back of the machine.

WEEKE IPC "PC 85T Power Control" + Windows "XP" + WoodWOP 5.0 operating system;

"Beckoff" PLC for (3) axes with linear, circular & helical interpolation, 15" TFT Monitor with 2D / 3D "REAL TIME" graphics, industrial keyboard for data entry, CD R/W & 1.44 MB floppy drives, modem, USB slot,

(1) 100 m³/Hr "Becker" Vacuum Pump (2012), 2-zone safety mats (will stop machine if operator enters work area), safety fences, scrap conveyor, hand held pendant controller.

Seller Statement: All (most) airlines have been recently replaced.  Pictures 20-25 are of the machine before it was prepared for shipping.

The information provided in this lot was gathered from literature, internet & physical inspection.  It is thought to be accurate; but not guaranteed.  Bidders are urged to use the open house or private inspection periods to inspect and verify.

Additional Information
  • Located 6595 Peachtree Industrial Blvd ste b, Peachtree Corners, GA 30092
  • MAKE Weeke
  • MODEL "BHC Venture 2"
  • SERIAL NUMBER 0-250-17-0783
  • YEAR 2006 CNC - (2012) Vacuum pump
  • PHASE 3 PHASE
  • VOLTAGE 230/460
  • INSPECTION DATE Open House - Monday May 23, 2022 - 8AM - 3PM - No appt. needed.
  • FINAL REMOVAL DATE June 3, 2022
  • ESTIMATED DIMENSIONS 32" x 32" x 80" Control cabinet, 260" x 86" x 90" cnc, 285" x 96" Pallet
  • ESTIMATED WEIGHT 7,500 Lbs
  • Value Added Service Info Aaron @ All-Ways Trucking @ 541-608-6532 or John @ NCL Trucking @ 615-452-7651
  • Load FEE A rigger is required. Buyer's Responsibility for Break-down, loading and removal.
  • Lot # 007
  • System ID # 35781223
  • End Date
  • Start Date
  • 1020 Page Views
Value Added Service Options
CONTACT ALWAYS TRUCKING 541-608-6532 $0.00 USD
CONTACT LOCAL RIGGER $0.00 USD