Bidding has ended on this item.
#LOT003

2019 Homag Edgeteq S-300 Optimat "KDF 440C" Edgebander Ended

Complete Plant Closure - Salt Lake City, UTAH

  • Winning Bid : $48,001.00 USD Sold
  • 80 Bid(s)
  • High Bidder: b****d
Documents
No documents available
Bidding Info
This auction uses Proxy Bidding.
Bids placed within the final 5 minutes will extend the auction closing time by 5 minutes.
img

Complete Plant Closure - Late model Stiles Machinery - Salt Lake City UTAH ( Closed #22976631 )

Featuring 2019 Homag Centateq N-300 Optimat CNC Router Cell System - 2019 Homag Edgeteq S-300 Optimat "KDF 440C" Edgebander - Friz "Optimat "MFP 14/27" Membrane Press - 2019 Nederman "S1000" 10HP Dust Collector - 2019 Gardner Denver "D20" Air Compressor - Yale Forklift, Plus much More!

  • Item Location

    Salt Lake City Utah 84119

  • Make

    Homag

  • Model

    Edgeteq S-300 Optimat KDF 440C

  • Serial Number

    0-261-71-4981

  • Year

    2019

  • Phase

    3 PHASE

  • Voltage

    208-230/460

  • Inspection Date

  • Final Removal Date

    8-14-20

  • Estimated Dimensions

    19' x 4' x 7.5''

  • Estimated Weight

    4078lbs

  • Seller Comment

    Rigger Onsite Non Negotiable Load Fee - Contact Bivian at Capital Equipment 801-652-6547

  • Load Fee

    $1000

  • page views

    5678

Thickness Coils 0.4-3mm

Thickness Strips 0.4-8mm

Min Woklpiece Length 160mm

Min Workpiece Width 70mm

Workpiece Thickness 8-60mm

The EDGETEQ Series machines produce perfect edges for small shops to large-scale furniture and component industries who require the highest-quality results. With a wide variety of equipment designed to meet each customer's specific needs for materials, feed speed, aesthetics, and functionality, the EDGETEQ Series has a solution for every challenge.

Features & Details:

HOMAG EDGETEQ Series

Strength and stability

The EDGETEQ Series machines are built to withstand even the most challenging applications. HOMAG’s industry-leading transport chain design provides accuracy and stability as workpieces make their way through the machine along centrally-lubricated guides. Track pads securely hold the workpiece in place while a steel pressure beam applies even pressure and superior hold at optimum feed rates. For larger applications, the workpiece support and roller guides can be expanded for even greater stability.

Customizable features

The EDGETEQ Series machines transport workpieces effortlessly through a series of programmed processing stages located within the machine. Each stage performs its unique function with absolute accuracy and efficiency. Additionally, the EDGETEQ Series offers multiple features and capabilities within each stage of operation, giving manufacturers the flexibility to customize the machine to meet their specific needs today, while equipping themselves for future growth.

Cost-efficient operation

Set-up, operation and troubleshooting can be performed by a single operator. The EDGETEQ Series easy set-up results in less material waste and faster, safer machine adjustment.

Features & Details:

HOMAG EDGETEQ 4.4 Servo

Basic Construction: strong and stable

  • Integrated switch cabinet into the machine frame

  • Variable feed speed

  • Extendable solid work piece support track ;extends 600mm

  • Automatic chain track llubrication

  • Isolation transformer with variable infeed voltage for balancing all 3phases of incoming power and increasing the lifetime of the machine’s electrical components

  • Electrical equipment installed according toUL regulations

    Sound Cover

    The sound cover is equipped with two doors and a safety interlock system. When the sound enclosure door is opened, the corresponding unit shuts off. End trimming and fine trimming motors are equipped with electronic motor brakes to stop cutter rotation when the hood is opened or when the unit is shut off at the operator control panel.

    Solid infeed fence

    • Adjustmentofinfeedfenceviaservomotor

    Track

    • Industrialchainwithindustrialchainpads • Roundandflatguidance
    • Automatic feed track lubrication system

    Top Hold Down

    • 2 rows of staggered *rollers (*belt for 4.4 FCG airTec)
    • Smooth upper pressure *rollers (*belt for 4.4 FCG airTec)
    • Toppressurehold-down;motorizedforworkpiecethicknessadjustment

    Magazine

    • Automaticmagazineforstripandcoilfeeding
    • Line-controlledguillotine
    • Largecoiltable(800mmdiameter)withbuilt-inrollerstoallow3mmPVCcoils • Edgestripcapacity:0.4–8mm

Features&Details: HOMAGEDGETEQ4.4Servo(continued)

powerTouch Controller: Simple operator control

This machine features powerTouch touchscreen operation, the most user-friendly and intuitive machine control available. Fit, finish and functionality of the powerTouch control unite to provide a user interface like no other. Ergonomic touch operation controls zooming, scrolling and swiping. It’s essentially a tablet computer configured to operate a machine. It’s that easy to use. The powerTouch control system is the standardized interface across all HOMAG machinery.

Hardware

• FullHDwidescreenmulti-touchdisplay,keyboard,mouseandanindustrialPC • PLCcontrolaccordingtointernationalstandardIEC61131
• USBconnectionattheoperatingpanel
• Ethernetconnection10/100MBITRJ45

Joint Trimming Unit

The joint trimmer provides a clean, even edge for optimal edgebanding application. Trimming removes material tears, marks from scoring saws and material swelling.

• Infeedfencepositioningviaservoprogramcontrol
• 2motors:1clockwisemotor,1counter-clockwisemotor
• Verticalspindleadjustmentviadigitalsettings
• Electronic frequency changer for all trimming motors, including electronic motor braking • Diamondinserttoolingaccommodatesworkpiecethicknessupto40mm(60optional)
• Heightadjustment:3mm
• 100x44x30mm;Z=3

Panel Pre-Heating

• Panel pre-heating zone prior to glue application • 

5"zone length for optimum panel heating

QA-65 N Gluing Unit

The hot melt granulate glue application system is designed for PUR and or EVA adhesives and includes an automatic purge cycle. Pneumatic locking of the unit secures the workpiece at the last inch.
For safety, an automatic temperature reduction feature lowers the glue temperature by 50oC if no workpiece is run over a 15-minute span. The unit reheats in just three minutes.

• 2-levelsystem:350gwith8-minuteheatuptime;800gwith12-minuteheatuptime
• Hopperfeedingsystem(applicabletoonlytheQuickMeltconfiguration)
• LEDthermostatdisplayindicatesgluetemperatureofbothpre-meltingunitandglueroller • Direction of glue rollers is reversible
• Purgingofhotmeltgluewhileinthemachineforgluetype/colorchange

Pressure Zone

• Solid pressure zone with one driven main pressure roller and two idle post - pressure rollers • 

Motorized positioning of the pressure zone

Double-Motor End Trimming Unit

This straight/chamfer end trimming unit is equipped with 2 motors and electronic motor brakes. For safety, the unit applies a drawing cut system for reduced blade projection when processing thick workpieces.

• Stronglinearguidancesystem,5timesmorerigidthanroundbars • Toolingincluded
• Program-controlledindexingfromstraighttobevelendtrimming
• Twopositionindexingforoverhang

• Dustextraction

MS 40 Multi-Stage Fine Trimming Unit with 2 Radii

This top and bottom trimming unit is equipped with 2 motors and electronic motor brakes.

• Equippedwithtwo(2)0.55kW(3/4HP)12,000rpmtrimmingmotors • Electronic motor brakes
• Auto-tiltfeature
• Servo-controlledtoedgethickness

• Nestedtopcopysystem
• Four(4)profilechoices:Profile1,Profile2,Bevel,andFlushTrimmingviaprogramcontrol • Equippedwith2multi-profileradiuscutterheads,including4knifecarbideinserts

Single-Motor Contour Trimming Unit with Servo Control

This unit provides corner rounding

• Includesone(1)trimmingmotor0.35kw(1/2HP)12,000rpm;electronicmotorbrakes • Servoaxiscontrolforprofiledepthandedgethickness
• Diamondtoolingincluded
• Programcontrolledfortwoedgethicknesses

Finish Scraping Unit

Flat knives remove any unwanted material from the trimmed / scraped edge.

Buffing Unit

This unit smooths edges and optimizes color.

• 2polishingmotorsfortopandbottombuffingoflongitudinaledges • 2clothbuffingdiscs:150x20mmdiameter
• Inclinableverticallyandhorizontally

Software Preparation for Spray Units

• MachineissoftwarepreparedfortheLubrication,Anti-Static,Separating,andDetergent Spray Units.

MZ 40 Multi-Stage Profile Scraping Unit with 2 Radii

• Programcontrolledindexingofinoroutofposition
• Multi-profilefor2radii
• Servo-controlledpositioningofbothverticalandhorizontaltracingrollers • Nestedtopcopysystem
• Multi-profileinsertsarestandardandincluded

 

 

0.4 - 8 mm (0.016 - 5/16") edge; 8 - 60 mm (5/16 - 2-3/8") panel thickness; 160 mm (6-3/8") min. panel length and 70 mm (2-3/4") min. panel width.

Feed Speed, variable 8 - 14 MPM. (26 - 46 FPM), 11 MPM (36 FPM) when using contour trimming. 

Pre-Milling Station, (2) motors @ 2.25 kW (3.0 HP), 12.000 RPM, LH & RH rotation w/pneumatic jump control for chip-free and clean panel edges. Equipped with diamond cutter heads

Automatic Edge Magazine, for strip & coil stock, strips 0.4 mm - 8 mm (0.016 - 5/16"), coils up to 3 mm PVC and "HD" guillotine.  "Quick Change" Glue Tank for maintenance & glue color change.

Pressure Section,  1st. roller driven plus (3) idle rollers, timed pneumatic pressure controlled; Servo motor positioning for programmable edge thickness changeover.

End Trimming:  (2) Motor @ 0.35 kW (1/2 HP) 12,000 RPM, automatic chamfer from control panel 0°- 15°.

Flush/Bevel-Fine/Radius Trimming Unit:  Top/bottom (2) motors, 0.55 kW (3/4 HP) 12,000 RPM, auto tilt postioning 0° - 25°, with combination flush/radius/chamfer cutterheads; horizontal and vertical tracing wheels, equipped with brushless multi-axis Servo motors.

Corner Rounding Unit:  (1) Motor 0.35 kW (1/2 HP) 12,000 RPM for leading & trailing edges vertical corner rounding of panels; either radius or chamfer cutters can be mounted; 3 mm max. edge thickness. 

Scraping, Multi-Profile (PVC):  Top/bottom with (2) profiles. 1 mm and 2 mm or 3 mm instead of 2 mm, servo control positioning of vertical & horizontal copy wheels.  PVC scrape collection box. 

Scraping Glue Unit:  Flush top/bottom on panel surface with floating insert knives. 

Buffing Unit:  Top/bottom (2) motors, 0.10 kW (0.125 HP) 2,800 RPM. 

Motorized, programmable hold-down pressure beam; padded sound enclosure, used tooling and Original Factory machine documentation. 

Listed specifications were taken from the manufacturer’s published information and is assumed to be correct but not guaranteed.

Bidder is encouraged to inspect the machine, call with questions contact the manufacturer for more information.

Please log in to view the bid history

Pick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment.  For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532. Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased.  Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed.  

CONTACT ALWAYS TRUCKING 541-608-6532
$0.00 USD
LOADING FEE
$1,000.00 USD

All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa, MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.