Bidding has ended on this item.
#LOTPM-GEM2013

SCM GROUP "K560TE" HEAVY DUTY AUTOMATIC EDGEBANDER WITH PREMILL, YEAR 2013 Ended

LATE MODEL SCM EDGEBANDER AUCTION, ROCKLIN CALIFORNIA

  • Winning Bid : $15,900.00 USD Sold
  • 57 Bid(s)
  • High Bidder: D****3
Bidding Info
This auction uses Proxy Bidding.
Bids placed within the final 5 minutes will extend the auction closing time by 5 minutes.
img

SCM GROUP K560TE AUTOMATIC EDGEBANDER AUCTION, ROCKLIN CALIFORNIA ( Closed #12773174 )

LATE MODEL VERY CLEAN SCM GROUP MODEL #K560TE HEAVY DUTY AUTOMATIC EDGEBANDER WITH PRE-MILL STATION UP FOR AUCTION TO THE HIGHEST BIDDER. YEAR 2013 BUILT MACHINE INSTALLED NEW IN 2014. CURRENT REPLACEMENT PRICE FOR THIS MACHINE IS $62,000.00 AUCTION CLOSES ONLINE AT MACHINERYMAX.COM STARTING @ 11:00 AM PACIFIC TIME ON TUESDAY, NOVEMBER 13TH, 2018. PLEASE NOTE MACHINE IS CURRENTLY IN PRODUCTION IN ROCKLIN CALIFORNIA FACILITY. IF YOU WOULD LIKE TO SEE MACHINE IN PRODUCTION PRIOR TO BIDDING, PLEASE CONTACT KIRK @ 925-250-8248 SO AN APPOINTMENT MAY BE SET UP. **PICKUP LOCATION: THE MACHINE WILL BE AVAILABLE FOR PICKUP STARTING ON MONDAY, NOVEMBER 19TH, 2018. THE PICKUP LOCATION WILL BE THE FOLLOWING: 1905 N. MACARTHUR DRIVE, SUITE #110 TRACY CALIFORNIA 95376

  • Item Location

    ROCKLIN CALIFORNIA(PICKUP ADDRESS IN TRACY CALIFORNIA 95376)

  • Make

    SCM GROUP

  • Model

    OLIMPIC K560TE WITH PREMILL

  • Serial Number

    AH/117060

  • Year

    2013

  • Phase

    3 PHASE

  • Voltage

    230 VOLT

  • Inspection Date

    EMAIL OR CALL 925-250-8248

  • Final Removal Date

    NOVEMBER 28TH FROM TRACY CALIFORNIA FACLILITY

  • Estimated Dimensions

    EMAIL OR CALL

  • Estimated Weight

    APPROXIMATELY 3200 LBS.

  • Seller Comment

  • page views

    2281

SCM GROUP MODEL #K560TE HEAVY DUTY AUTOMATIC EDGEBANDER MACHINE

230 VOLT, 3-PHASE MACHINE

SERIAL #AH/117060

YEAR 2013 BUILT MACHINE INSTALLED NEW IN 2014.

**MACHINE IN GOOD OPERATIONAL AND RUNNING CONDITION.

**SPECS AS PULLED FROM MANUFACTURER WEBSITE(PLEASE NOTE AN EXPANDED QUOTATION IS ALSO ATTACHED TO THIS LISTING WHICH GIVE THE EXACT SPECS. OF THIS MACHINE:

Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 8mm.

 

MACHINE BASE

The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy.

 

TOP PRESSURE BEAM

All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings. 

 

 

 

CAPACITIES AND SPEED

 

  • Edgebanding thickness: .4mm - 6mm (.016-1/4”)
  • Guillotine capacity: 3mm
  • Feed speed: 36/52 ft/min.
  • Panel height: 3/8” min – 2 1/8” max
  • Minimum panel length: 5 1/2”
  • Minimum panel width: 2 3/8”
  • Minimum distance between panels: 20” 

 

 

 

GLUE STATION

Teflon coated glue pot to facilitate glue changeover. Warm up time is approximately eight to ten minutes. The unit is also equipped with a quick disconnect plug for changing from one pot to another.

 

 

 

PRESSURE SECTION

There are a total of three pressure rollers for pressing the banding to the workpiece edge. The first roller is powered,and it is also Teflon coated to prevent the banding material from slipping. The two idle rollers have opposing one-degree tilt to provide extra pressure along the top and bottom edge. The machine comes standard with an automatic strip magazine. Comes standard with a mechanical digital readout for the positioning of the pressure section. The glue pot is Teflon coated and has a 5.5lb. capacity.

 

 

 

ORION 1 PLUS CONTROLLER

 The machine comes equipped with the Orion 1 Plus controller. It has a LCD alpha numeric display. Operator has their choice of multiple languages. Soft touch keypad is standard. Operator can program glue temperature, monitor diagnostics and keep track of statistical information both partial and absolute. All functions can be controlled and selected from the keypad.

 

 

 

 ADUSTABLE INFEED FENCE

The infeed fence is manually adjustable with a mechanical digital readout for determining stock removal.

 

 

 

RT-V PRE-MILLING STATION:

To rectify/clean panels already sized and squared before the edge is applied. The unit is composed of two high frequency motors (2.0hp) with jumping action controlled through the PLC.  The cutting heads are adjustable vertically. Diamond cutters are standard with 49mm height. 

 

 

 

K-SEL 2” END TRIMMING STATION

 This unit is composed of two independent .50 hp motors mounted on THK guides. End trim utilizes a draw cut system for reduced blade projection on thick panels. The unit comes standard with automatic tilting of the unit from the control panel with two preset positions. 

 

 

 

 

R/K EDGE TRIMMING STATION  

 This unit is composed of two independent .7 hp motors operating at 12,000 rpm. It comes standard with THREE position pneumatics, this allows the operator to go from thin tape, to 3mm pvc, to solid wood, through the control panel. All adjustments are carried out with mechanical digital readouts. The unit has top and bottom copy wheels and side copy shoes. The motors have quick release plugs to facilitate tooling changes.

 

 

 

 RAS / K PROFILE SCRAPING STATION

The profile scraping station designed to remove knife marks from thick PVC. The unit is equipped with pneumatic in/out positioning through the controller. It has a large diameter horizontal copy wheel and side copy wheel device with digital indicators. It features a quick knife replacement system and comes with 3mm knives. 

 

 

 

SP-V BUFFING UNIT

 The buffing unit has two .25 hp motors. It can also be tilted up to 12 degrees to provide a softer, more refined edge finish

 

 

ACOUSTICAL SAFETY ENCLOSURE

All working units are enclosed under an acoustical safety hood to reduce noise and prevent accidents. The hood has a safety microswitch which prevents the machine from operating when the hood is open. 

 

 

CENTRALIZED DUST EXTRACTION

Machine comes with two 3” ports for the premilling station, two 2” ports for the top and bottom trim station and one 3” port for the 3mm collection bin for extraction.

 

Listed specifications were taken from the manufacturer’s published information and is assumed to be correct but not guaranteed.

Bidder is encouraged to inspect the machine, call with questions contact the manufacturer for more information.

Please log in to view the bid history

*A $150.00 LOADING FEE WILL BE ADDED ONTO THE WINNING BIDDERS INVOICE.  LOADING IS ONTO FLAT BED TRUCK OR TRAILER ONLY.

**THE PICKUP ADDRESS OF THIS MACHINE WILL BE IN TRACY CALIFORNIA STARTING ON MONDAY, NOVEMBER 19TH, 2018.  PICKUP ADDRESS IS AS FOLLOWS:

1905 N. MACARTHUR DRIVE, SUITE 110

TRACY CALIFORNIA 95376

PH:  209-832-0100

CONTACT ALWAYS TRUCKING 541-608-6532
$0.00 USD
LOADING FEE
$150.00 USD

PAYMENT IS DUE WITHIN 24 HOURS OF AUCTION CLOSE TIME.  WIRE TRANSFER, CASHIERS CHECK, ACH ARE ACCEPTABLE FORMS OF PAYMENT.