NOTE: This unit has been profiessionally broken down and is prepared for shipment. See picture which shows machine as it sits now!
Falcioni "MONOSPRAY 700" Inline Finishing System
Machine is still under operation and available for inspection
Hour Meter: 4623
Owner will assist in dismantling and prep for shipment
Max Working Width 27"
Exhaust Duct 20x14.2"
Working Table Height 35"-37"
This automatic flat line sprayer is equipped
with one (1) reciprocator in the center of the spray
booth for spraying coatings, stains, base coats
and topcoats on flat or contoured panels
Frame structure in welded and enameled steel
One (1) reciprocating arm in center of booth complete
with spray gun holders with electronic speed control
Reciprocating arm runs on special guides with
high precision and hardwearing shoes
Central extraction area completely free span
One (1) independent paint feed circuits. Each circuit
for 4 spray guns with 4 explosion proof electro valves (spray guns not included)
Only one circuit can operate at a time.
Spray gun atomizing air and paint line feed tube movements
inside of reciprocator, shielded from spray zone
Internal surfaces of booth made in smooth painted panels
shaped in order to avoid, as much as possible
collecting spray dust and for easy cleaning
One (1) hinged inspection door at the side of the booth
Two (2) explosion proof lights for booth lighting
Transport by use of a mylar belt with a belt cleaner.
Maximum transport speed of 20 feet per minute.
Spray triggered by a photoeye circuit and electronic delay
Light Bar to read width of workpiece and programming of gun timing
Separate from machine and complete with all control and safety devices
PLC interface to control spray width settings
tracks piece count and square footage.
Spraying configuration control of arm stroke and
of all its accelerations and decelerations to guarantee
constant arm speed in the spraying zone
Total installed capacity: 7.5 Kw (10 Hp)
Power supply: 460/230 V, 3 phase
Motors, fans, lights, and couplings: IP55 standard
AIR FILTERING SYSTEM
Air extraction ducting with dry pre-filters inside the
spray booth and dry filters inside the filter cabinet
Electric extractor fan with electronic regulation (2 hp 20” diam. fan)
Forced air supply into spray cabinet by 2 – 0.5 hp
fans ensures positive pressure in booth to eliminate contaminants
Includes Step Down Transformer for 230 Volt
Includes extra gun and acesories as pictured