Ask Seller
BRANDT "OPTIMAT KDN 520" AUTOMATIC EDGEBANDER, LOW HOURS 
Ended
WASATCH FURNITURE AND DESIGN AUCTION - MURRAY UT
- Winning Bid : $11,950.00 USD Sold
- 82 Bid(s)
- High Bidder: a****s
WASATCH FURNITURE & DESIGN MACHINE AUCTION - MURRAY UTAH ( Closed #25000817 )
ASSETS NO LONGER NEEDED FOR PRODUCTION AT WASATCH FURNITURE & DESIGN IN MURRAY UTAH. AUCTION INCLUDES 2015 IRONWOOD 2-SIDED PLANER, KAESER AIR COMPRESSOR, DODDS DOVETAIL MACHINE, (2) CASTLE DRILL TUBS, WEEKE VENTURE 3 CNC MACHINE, BRANDT KDN 520 EDGEBANDER, AND MUCH MORE. AUCTION CLOSES STARTING @ 11:00 AM PACIFIC TIME ON WEDNESDAY, NOVEMBER 18TH, 2020. FOR QUESTIONS OR IF YOU WOULD LIKE TO VIEW MACHINES PRIOR TO AUCTION CLOSE, PLEASE CONTACT KIRK @ 925-250-8248 OR ON EMAIL AT [email protected]
-
Item Location
372 W. WINCHESTER STREET, MURRAY UT 84107
-
Make
BRANDT
-
Model
OPTIMAT KDN 520
-
Serial Number
0-261-02-9790
-
Year
2005
-
Phase
3 PHASE
-
Voltage
230 VOLT
-
Inspection Date
BY appointment only, contact Kirk Gass 925-250-8248
-
Final Removal Date
DECEMBER 2ND, 2020
-
Estimated Dimensions
-
Estimated Weight
-
Seller Comment
-
Load Fee
-
page views
4036
BRANDT MODEL #OPTIMAT KDN 520 AUTOMATIC EDGEBANDER
230 VOLT, 3-PHASE
2005 MACHINE WITH ONLY APPROXIMATELY 233 HOURS
SERIAL #0-261-02-9790
Brandt "KDN-520" Edgebander
Edgeband thickness 0.4 - 8 mm (0.016" - .250") ( 5/16”)
Coil cutoff maximum 0.8 x 55 mm 3.0 x 30 mm (PVC)
Edgeband height 12 - 55 mm (1/2" – 2 3/16”")
Panel length min. 160 mm (6 3/8")
Panel width min. 65 mm (2 3/8")
Panel thickness - min. 8 mm (5/16") - max. 50 mm (2")
Feed speed 11 m/min (36 FPM)
Feed motor 2.2 kw (3 HP)
Automatic Magazine for Strip and Coil Feeding
Large coil table (800 mm diameter) with built-in rollers to allow for 3 mm PVC coils
Edge strip capacity from 0.4 mm to 8 mm (0.016” – 5/16”)
Reversible glue roller rotation
Glue roller section is also retractable from fence line
One large driven pressure roller with pneumatic pressure control
Two secondary rollers, all with controlled side pressure
Setting of pressure zone equipped with digital counter accurate to .1 mm (.004")
Strengthened pre-cutter for cutting thick PVC edges from the coil; maximum 3 x 30 mm
Standard Gluing System, heat-up time is twelve minutes, quick-change glue tank for easy maintenance and glue color change
Glue temperature indication of both pre-melter and glue roller via LED thermostat display visible to operator
Automatic temperature reduction if not run within 15 minutes. This feature lowers the temperature automatically to 150 degrees C
End trim unit - two motors .18 kw (1/4 HP), 12,000 RPM, straight cut max. 8 x 45 mm (5/16" x 1 3/4")
Fine trimming unit .27 kw (1/3 HP), tilting range 0 - 15 degrees, 12,000 RPM, horizontal and vertical tracing with lateral location indexing via digital “Quickset” system calibrating to .1 mm (.004”)
Top/bottom scraping unit, program controlled pneumatic indexing
Top/bottom Buffing Unit, 2800 RPM, inclinable vertically and horizontally
Electronic frequency inverter
Integrated Electronic Line Control System for Increased Reliability and Diagnostic Assistance
PLC for machine setup and feedback
Outboard roller support
Sound Cover, equipped with two independent openings, safety interlock system
Listed specifications were taken from the manufacturer’s published information and is assumed to be correct but not guaranteed.
Bidder is encouraged to inspect the machine, call with questions contact the manufacturer for more information.
Please log in to view the bid history
LoginPick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment. For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532. Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased. Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed.
All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.