Ironwood "S 124 RK" Wide Belt Sander - 2-Head (2015) Ended
Late Model Machinery in Livermore, CA
- Winning Bid : $10,000.00 USD Sold
- 39 Bid(s)
- High Bidder: P****D
Custom Cabinet Shop - Livermore, CA ( Closed #16875866 )
Late Model Machinery (Mostly 2012 - 2017)- SCMI, Brandt, Ironwood, Tigerstop, OMEC & more!!!
-
Item Location
Livermore, CA
-
Make
Ironwood
-
Model
"S 124 RK" Wide Belt Sander - 2-Head (2015)
-
Serial Number
150423
-
Year
2015
-
Phase
3 PHASE
-
Voltage
230/460
-
Inspection Date
July 8, 2019 10AM - 2PM
-
Final Removal Date
07/19/2019
-
Estimated Dimensions
82" x 75" x 80"
-
Estimated Weight
5560#
-
Seller Comment
CONTACT ALWAYS TRUCKING 541-608-6532
-
page views
2317
Head # 1 is a steel contact roller o 250 mm Ø profiled steel contact roller o Height adjustable contact roller with dial indicator for grit compensation o 30 horsepower motor o Cutting speed of 20 mps (65 fps) o Cutting direction against feed
Head #2 is a combination head o 140 mm diameter 65 shore profiled rubber contact roller o Height adjustable contact roller with dial indicator for grit compensation o Height adjustable sanding pad o 20 horsepower motor o Cutting speed of 12 mps (40 fps) o Cutting direction against feed Poly-V belt drive for all sanding heads for smooth and vibration-free sanding head operation
Height adjustable contact rollers on all sanding heads with dial indicators for quick and easy setup and grit compensation Rubberized hold down rollers before and after each sanding head with double hold down rollers at outfeed for consistent hold down Automatic conveyor belt tracking for worry-free conveyor belt operation Abrasive belt tensioning located on front of machine with safety switches for belt breakage.
Description
S 124 RK Working width max.
1070 mm (42”)Conveyor belt width 1100 mm (43”)Abrasive belt width 1100 mm (43”)Abrasive belt length 1900 mm (75”)Workpiece thickness min. 9 mm (3/8”)Workpiece thickness max. 150 mm (5.9”)Workpiece length min. 450 mm (17.5”)
Variable conveyor speed 3.6 – 14 MPM (12 - 46 FPM)Feed motor 3 HP Table rise/fall motor ½ HP
Head #1: 250mm steel contact roller 20 HP 65 fps belt speed Head #1: Rotation direction Against the feed
Head #2: Combination head – 140mm 65 shore rubber contact roller with felt pad 15 HP 40 fps belt speed Head #2: Rotation direction Against the feed
Electrical connection 230/460V, 3 Phase, 60 Hz Amperage 230/460V 116 @ 230V / 58 @ 460V Dust collection requirements 4,000 CFM Compressed air requirements 90 PSI Air consumption per cycle 4 CFM Machine net weight 2,520 kg(5,560 lbs.)
PLEASE NOTE: All specifications for this item were taken from literature & visiual inspection. They are considered accurate, but not guaranteed. Please take advantage of the inspection to verify for yourself.
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginPick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment. For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532. Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased. Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed.
RIGGER CONTACT INFORMATION:
AMERICAN RIGGING, INC.
BILL JR. @ 408-593-0040
All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.