Bidding has ended on this item.
#LOTSCM-1-KG

SCM GROUP "L'INVINCIBILE SI-5" PROGRAMMABLE SLIDING TABLE SAW, YEAR 2015 Ended

LATE MODEL SCM PROGRAMMABLE SLIDING TABLE SAW, MONTROSE COLORADO

  • Winning Bid : $17,300.00 USD Sold
  • 48 Bid(s)
  • High Bidder: b****a
Bidding Info
This auction uses Proxy Bidding.
Bids placed within the final 5 minutes will extend the auction closing time by 5 minutes.
img

SCM L'INVINCIBILE SI-5 PROGRAMMABLE SLIDING TABLE SAW, MONTROSE COLORADO ( Closed #12733818 )

YEAR 2015 BUILT SCM GROUP MODEL #L'INVINCIBILE SI-5 HEAVY DUTY PROGRAMMABLE SLIDING TABLE SAW MACHINE UP FOR AUCTION TO THE HIGHEST BIDDER. APPROXIMATE REPLACEMENT COSTS ON THIS MACHINE IS $52,995.00. AUCTION CLOSES ON MACHINERYMAX.COM STARTING AT 11:00 AM PACIFIC TIME ON TUESDAY, OCTOBER 30TH, 2018. AUCTION LOCATION: 62597 JADE ROAD MONTROSE COLORADO 81401 PLEASE CONTACT KIRK @ 925-250-8248 FOR ADDITIONAL INFORMATION

  • Item Location

    MONTROSE COLORADO 81401

  • Make

    SCM GROUP

  • Model

    L'INVINCIBILE SI-5

  • Serial Number

    AB/222860

  • Year

    2015

  • Phase

    3 PHASE

  • Voltage

    230 VOLT

  • Inspection Date

    EMAIL OR CALL

  • Final Removal Date

    NOVEMBER 7TH, 2018

  • Estimated Dimensions

    EMAIL OR CALL(SEE SPECS ON PDF ATTACHED)

  • Estimated Weight

    APPROXIMATELY 3000 LBS.

  • Seller Comment

    $250.00 LOADING FEE ADDED TO WINNING BIDDERS INVOICE

  • page views

    2324

SCM GROUP MODEL #L'INVINCIBILE SI-5 HEAVY DUTY PROGRAMMABLE SLIDING TABLE SAW MACHINE

230 VOLT, 3-PHASE MACHINE

SERIAL #AB/222860

**SPECS AS PULLED FROM MANUFACTURER QUOTE TEMPLATE.  MOST INFORMATION AND EXPANDED QUOTE TEMPLATE IS ALSO INCLUDED AND ATTACHED AS A PDF FORMAT IN THIS LISTING.

L’Invincibile SI 5 – Sliding Table Saw

The SI 5 L’invincible represents the top-of-the-line in SCM Groups American sliding table saw lineup. It boasts a touch-screen programmer that utilizes breakthrough technology to assist the operator in cutting complex components. It also features powered movement for the main and scoring blades as well as a programmable rip fence for maximum accuracy. Shops looking for the ultimate in accuracy and versatility will appreciate this saw.

 

 Easy Five-Axis Programmer

The “EASY” 5 axis programmer controls blade raise & lower, blade tilt, rip fence position, scoring height, and scoring left to right.  It has a simple touch screen for easy data entry.  

 

 

It has the following features:

  • 7” Easy LCD touchpad screen in 16:9 format of all program functions 
  • Intuitive graphic Duraswitch pushbuttons 
  • Integrated and fast management of all integrated functions, improving overall productivity
  • 5-axis electronic control for saw blade lifting and tilting, powered rip fence, and motor-powered movement of the horizontal and vertical positioning of the scoring blade, selectable by means of numerical keyboard and displayed on electronic digital readouts  
  • Program function to assist with work stop positioning on the crosscut and miter fence, for cuts with tilted blade and/or angular cutting on the worktable   
  • Memory capacity up to 300 working programs 
  • Automatic activation of the scoring blade
  • Wireless – Adjusts LCD Stop readout in real time according to blade tilt and/or cutting angle.

 Full Rotating Crosscut Support

The full rotating crosscut support is designed for maximum precision when cutting angles. It rotates on precision hardened steel guideways. An LCD Digital display reading from a magnetic band ensures the accuracy on the angle to be cut. This support also includes (3) LCD Wireless displays for the crosscut stops, an extendable roller for additional panel support, and Quick Locking squaring fence.

 

 

RADIUS STEEL GUIDEWAY SYSTEM

Guideways are ground to tolerance allowing for perfectly precise and permanent fitting of the wagon assembly.  The radius is ground into the steel guides increases contact area along the bearing surface which eliminates pre-mature wearing of the bearing and guides. The steel guides are mechanically dovetailed into place, (not glued).  The guideways way tolerance of this system is +/- .05mm (.002”) along the entire length of the carriage. With this system it is 4 times higher with respect to any other system.    

(10 YEAR WARRANTY TABLE GUIDEWAY TOLERANCES)

 

 LCD Readouts With Wireless Technology 

The SI5 L’Invincibile comes standard with three LCD readouts on the crosscut fence. These readouts are extremely accurate.  The actual stop has a special design using a rigid bearing so that it stays true for the life of the saw. It will not wear, and will not develop any side to side “play” over time. The wireless feature allows each stop to adjust it’s positioning as the full mobile support is angled and/or the main blade is tilted in real time. It more accurately changes the readout of the stop position automatically while you mitre or tilt the angle of the blade.

 

 Motor Start/Stop On Slider

Easily turn on and off the main blade, and scoring blade from the end of the sliding table.  This makes starting the machine more convenient when cutting large panels.

 

 

Rip Fence Movement

A recirculating ball screw and THK guides control the movement of the rip fence. This allows rapid fitness positioning while maintaining very close tolerances and accuracy.  The rip fence also swings out-of-the-way when necessary. 

 

 E-Z Dial Scoring Set

Adjusting the scoring set is quick and easy. Simply turn the dial to adjust the width of the score. This system eliminates the need for shims and the constant adjustment they require. It is fully adjustable in 0.1mm increments. 

 

 

Cast-Iron Blade Group

The L’invincibile series sliders incorporate a massive cast iron blade group. The blades raise and lower on two steel pillars.  The entire group is closed in order to minimize the dust breaching of the saw cabinet, thus maintaining a longer lift for the saw with less internal maintenance.

 

Major Features**

Anodized aluminum alloy carriage sliding on radiused hardened steel guides

“EASY” electronic controller

Separate Mitre Fence for Angle Cuts

Speed change through inverter

Programmer for powered rip fence, blade group (raise, lower, and tilt) adjustment, with memory capacity up to 300 programs with 6 cuts per program (Hundreds of sequences) 

 “EASY” automatic calculations of miter stop positions for angled cuts 

2 Axis powered blade group (closed casting, dual blade guide rails) arbor tilt from 0 to 45 degrees

2 Axis powered scoring blade movement with auto exclusion

1 Axis powered rip fence movement 

Full rotating crosscut support with telescopic roller and an LCD display for miter angle

Crosscut support achieved by linear guides (THK) eliminating friction with heavy loads.

(3) Wireless LCD readouts for crosscut stops

Overhead control panel  

Dado Capable

Gantry mounted pivoting blade guard with integrated dust outlet

 “EZ Dial” Adjustment for the split scoring blade

Motor control buttons integrated into the sliding carriage

Eccentric clamp for panel hold-down

Table extension on exit side

Overload switch protection

Auxiliary low voltage circuit (110 voltage)

Automatic brake on main motor

 

 

 

 

 

Listed specifications were taken from the manufacturer’s published information and is assumed to be correct but not guaranteed.

Bidder is encouraged to inspect the machine, call with questions contact the manufacturer for more information.

Please log in to view the bid history

AS SEEN BY THE PICTURES, MACHINE HAS ALREADY BEEN CRATED BACK UP IN AN ORIGINAL SCM CRATE.  WINNING BIDDER WILL BE CHARGED A $250.00 LOADING FEE TO LOAD MACHINE ONTO FLAT BED TRUCK OR COMMON CARRIER.

MACHINE NEEDS TO BE PICKED UP BY NOVEMBER 7TH, 2018 AT THE LATEST.

CONTACT ALWAYS TRUCKING 541-608-6532
$0.00 USD
LOADING FEE
$250.00 USD

WIRE TRANSFER PAYMENT ONLY.  PAYMENT DUE WITHIN 48 HOURS OF AUCTION CLOSE TIME.